Mishimoto Catch Can Kit – PCV Side | 2018-2021 Kia Stinger GT (MMBCC-STNGR-18PBE) Mishimoto

2018+ Kia Stinger GT PCV Side Catch Can Kit by Mishimoto

The 2018+ Kia Stinger GT catch can kit is mounted with a robust, application-specific bracket, our patent pending compact 2-port catch can is installed in line with the factory PCV system in order to separate fuel vapors and oil droplets from the relieving crankcase pressure. As an extra layer of defense, our catch can also includes a 50-micron bronze filter designed for capturing any rogue blow-by particles.

Installation is a breeze with our pre-molded hoses, keeping the time you spend under the hood to less than 30 minutes. Like all of our products, the Mishimoto 2018+ Kia Stinger GT Direct-Fit Catch Can Kit is covered under the Mishimoto Lifetime Warranty to protect your investment on more than one level.

Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.

Features

• Single can mounts in line with the PCV system to separate oil from air using a 50-micron bronze filter
• Helps reduce carbon buildup on intake valves
• Patent pending billet 6061 aluminum can sealed with Viton™ O-rings
• Installs in under 30 minutes
• Robust, application-specific bracket mounts the can in a serviceable location
• Includes pre-molded hoses for simplified installation
• Defends intake system and essential components from oil blow-by
• CNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can
• Catch can has a 3 oz. capacity for longer servicing intervals
• Internal air diverter increases air turbulence to improve oil separation
• Helps maintain proper octane levels to reduce potential detonation
• Filter and can are fully serviceable

Please Note: After installation, Mishimoto recommends checking the contents of the baffled catch cans every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.

Applications

• 2018 – 2021 Kia Stinger GT

What’s In The Box?

• 1 – Compact Baffled Oil Catch Can
• 1 – Application-Specific Mounting Bracket
• 2 – Direct-Fit Hoses
• 1 – 3/8″ Aluminium Barbed Fitting
• 1 – 1/2″ Aluminium Barbed Fitting
• 4 – Worm Gear Clamps
• Mounting Hardware

References

• Installation Instructions

Warranty

• Mishimoto Lifetime Warranty