Morimoto Gatling Gun 2.0 Shroud | Multiple Fitments (S90) Morimoto

Gatling Gun 2.0: Compared to the other shrouds intended for the MH1, the Gatling 2.0 has more depth, which equals more coverage. This is important when retrofitting the Mini H1 due to their naturally forward sitting position inside the headlight. Inspired by the original Gatling Gun, but improved to use the shroud centric rings for an easier install on the Mini H1 In Comparison: Don’t make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o’s out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a “press fit” onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it’s normal. Luckily, they’re made of plastic – making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.

Features

• Dimensions: 119mm DIA, 61mm D
• Finish: Forever Finish Chrome
• Halo Size: 80mm (Front), 90mm (Vent; WILL NOT FIT 3in LENS PROJECTORS!)

Applications

• MORIMOTO PROJECTORS: All except Matchbox
• OEM PROJECTORS: Most except TL, LS430, LS460, Q45
• LENS DIAMETERS: 2.5in and 3in Compatible (mods. Required)
• LED HALOS: See Size-Guide ‘In Action’ section below
• MOUNTS WITH: Centric Rings and/or JB Quik Weld

What’s In The Box?

• Shroud: 1x Gatling Gun 2.0 Projector Shroud

References

• Installation Instructions

Warranty

• Warranty: 5 Years